Tail Cone Priming Part #1

 After all the parts were deburred it was time to try my new air powered Jitterbug that I picked up at Harbor Freight.  Water and electricity don't mix so I could not use my electric one for this task.  Turns out it worked great!

Here is a quick video on how I am using it.  Wet the parts, sprinkle on some BonAmi and go to work.

Parts all prepped and waiting on them to dry.

This is how I mix up the AKZO for a priming session.  This stuff starts to separate rapidly so it is important to mix it good so the solids are in suspension.

First batch of parts all primed!  Sorry about the blurry pic!