Got started on my custom rear avionics shelves I want to fab and get fitting while the whole tail cone is opened up and accessible. I made a cardboard template of the decks that I am going to cut out of 0.063 2024-T3 sheet. Don't want to waste this high dollar stuff!
Side one marked.
Side two marked.
Ready to cut!
The angles do not align with the side skin J stiffener and therefore I had to come up with a way to transition this fact. Here is what I came up with. It works well.
Since it is hard to see how it is made, I made a napkin CAD sketch. Sorry!
No comments:
Post a Comment