Tonight I had to go invest in some adjustable saw horses for assembly of the tail cone. I will have to add a plank to the top of them to get them high enough while the assembly is upside down. This is so the largest bulkhead will clear the ground. I am just going to screw a 2x8 edgewise to the top of them to solve the issue.
Next I marked the centerline on the J stiffeners along the long edge. I bought this compass thing at Lowes for $5, added two zip ties and a sharpie pen and walla, instant adjustable edge marking tool supreme! Doing the marking this way prevents the bow in the stiffener from screwing up the centerline.
Works slick as a ribbon!
No comments:
Post a Comment